Etrier frana tr

SBP - TEQ

Technical condition requirements for removed truck brake callipers

1. The core cannot be mechanically damaged - cut, cracked, deformed. 2. The core must be complete and unscrewed. 3. The core cannot be heavily corroded. 4. The pin socket must not be deformed. 5. If the clamp is sold with a yoke, the core must also be returned with a yoke.6. The returned core must not have any slack in the guides (applies to hydraulic clamps only). 7. Callipers marked / branded as " MEI " will not be accepted.

Przykłady nieakceptowalne

Clamp incomplete - not acceptable

Clamp incomplete - not acceptable


Incomplete core - unacceptable

Incomplete core - unacceptable


Fastening of pads (yoke) in hydraulic-pneumatic calipers - required

Fastening of pads (yoke) in hydraulic-pneumatic calipers - required


Any looseness on the guides in hydraulic-pneumatic calipers - unacceptable

Any looseness on the guides in hydraulic-pneumatic calipers - unacceptable


Discalibrated pad mounting - unacceptable

Discalibrated pad mounting - unacceptable


Deformed pin seat - unacceptable

Deformed pin seat - unacceptable


Mechanical damage - unacceptable

Mechanical damage - unacceptable


Worn and overheated caliper - unacceptable

Worn and overheated caliper - unacceptable


Overheated clamp - unacceptable

Overheated clamp - unacceptable